¡ß Sanitary pressure gauge(3 - A marking) ¡ß
¡Ü Model : P752S
¡Ü Service intended :
P752S series have diaphragm seal to be combined with a pressure gauge. These series are suitable to be used for the situation where corrosive, contaminated, hot, and viscous pressure mediums are present, and it could be used for a chemical, food, beverage, biochemical, and pharmaceutical industry.
¡Ü Special features :
- 3-A certificated
- Suitable for SIP and CIP
- All stainless steel and welded construction
¡Ü Nominal diameter : 50, 63,80 and 100mm
¡Ü Accuracy :
- P752 (50 mm) : ¡¾3.0% of full scale
- P752 (63 mm) and P752 (80 mm) : ¡¾1.6% of full scale
- P752 (100 mm): ¡¾1.0% of full scale
¡Ü Scale range (MPa, kPa, bar) : -0.1 ~ 7 MPa
¡Ü Working Pressure :
- Steady pressure : 75% of full scale value
- Fluctuating pressure : 67% of full scale value
¡Ü Operating temperature :
- Ambient : -25 ~ 65¡ÆC
- Fluid : Max.121¡ÆC
¡Ü Temperature effect :
Accuracy at temperature above and below the reference temperature (20¡É) will be effected by approximately ¡¾0.5% per 10¡É of full scale
¡Ü Process connection :
- ¨úS, 1S, 1¨öS and 2S
- Low and back
¡Ü Diaphragm and seal housing :
- Diaphragm : stainless steel ( 316L SS )
- Seal housing : stainless steel ( 316SS )
¡Ü Case :
- Stainless steel (304SS)
- Electropolished with pressure relief
¡ÜCover :
- 50 mm : Twist-lock polycarbonate (Diameter 50 mm)
- 63, 80 and 100 mm : Stainless steel 304SS
¡Ü Window :
- Safety glass (63, 80 and 100 mm)
- Polycarbonate (50 mm)
¡Ü Movement : Stainless steel
¡Ü Dial : White aluminium with black and red graduations, dual pressure scale and pointer stop pin
¡Ü Pointer : Black painted aluminium alloy
¡Ü Helium leak rate :
- Tested to confirm leakage rates of less than
- 10 mbar •§¤/sec
¡Ü System filling : USP grade glycerine (FDA approved)
¡Ü Optional :
- Material of wetted parts : electropolished 316L SS
|